[Wing] fuselage jig

[Norman Younie]

Mount the longerons in place starting at the fire wall, mount all the 
bulk heads in place and the side skins. Then cut them to the proper 
length at the tail end at the end of the last bulk head flange. This can 
all be done after the skins are clecoed in place. Don't be in a big 
hurry to cut them till all of the fuseage has been fitted together.

Norman RV-6, RV-7, RV-7, F1 Rocket

pat morency wrote:

>Just laid out the fuse jig, leveled, centered, bent
>the longerons, attached the firewall F601 and the aft
>F612 bulkhead.  The Longerons appear to be too long by
>about 2 inches depending where they are supposed to
>end at the F612 (end of the first flange or end of the
>airplane).
>What is the best order of progress at this point? Fit
>the F604 to F611 bulkheads and then cut the Longerons
>or set the longerons at a specified distance from the
>center line and then hope the bulkheads fit in the
>opening at that station?
>
>Regards,
>Pat in Calgary
>
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around 
>http://mail.yahoo.com 
>_______________________________________________
>Wing mailing list
>Wing at vansairforce.org
>http://vansairforce.org/mailman/listinfo/wing
>
>  
>