[Wing] Tools For Sale

[Tedd McHenry]

This is from the Ontariorvators list.  The tools are in Milton, Ontario.  This
looks like a good collection for someone starting an RV project.  Are is
selling the tools because he is moving overseas.

---

Tedd McHenry
Van's Air Force
Western Canada Wing
tedd at vansairforce.org
www.vansairforce.org

---------- Forwarded message ----------
Date: Sun, 19 Sep 2004 15:21:52 -0400
From: Are <are at ontariorvators.org>
Reply-To: ontariorvators at yahoogroups.com
To: ontariorvators at yahoogroups.com
Subject: [ontariorvators] RE: RV-8 empennage, wings and tools for sale - Milton,
     Ontario Canada

Wings and empennage sold this morning.

Tools are still left.

You will get everything included in Avery's complete RV builders toolkit
(including rivet gun, drill, etc.) plus more and lots of clecos. Note: does
not include 90 deg angle drill extension.

New price of toolkit $2200US plus you will probably get an extra $500-1000
worth of tools.

** $1100US ($1450 cdn) takes it all.

Does not include these tools:

13" drill press - 250-3100 rpm - $90cdn

5 hp/20g Air compressor - $300cdn

Band saw (small - $40 takes it)

bench grinder with scotchbrite wheel - $25cdn

bench belt sander - $25cdn

brand new certified torque wrench 20-150 ft.in 1/4" drive from Cleaveland
tools: $75cdn (was $145US)

Parker Rolo Flare tool - $50 cdn

Pick-up only!

You can call me anytime at 416-460-5141

Are

  -----Original Message-----
  From: Are [mailto:are at ontariorvators.org]
  Sent: Saturday, September 18, 2004 8:15 PM
  To: ontariorvators at yahoogroups.com
  Subject: RV-8 empennage, wings and tools for sale - Milton, Ontario Canada


  All,

  I have been offered and have accepted a position in Norway where I will be
working as head of IT for a large oil exploration company. This is a great
opportunity and too good to pass up. They want me over there pronto and so I
will start the job already on October 18th.

  My tools will not work there since everything is 220/50hz. It is also very
tough to get a moving company to take the wings and empennage.

  Wings are 80% complete but not covered yet. One of the wings have one side
covered. One fuel tank (w/capacitive senders) is done and leak tested. The
other tank is ready for sealing. Landing lights have been fitted in the
leading edge. Empennage is inspected and closed. I have the inspection
papers. Ailerons needs to be built. Flaps needs to be built.

  The wings comes in a cradle.

  I also have a TSO'd altimeter w/light, VSI w/light and compass w/light. I
have a heated pitot/static tube from Gretch Aero.

  Tools:

  13" drill press - 250-3100 rpm - $90cdn
  5 hp/20g Air compressor - $300cdn
  Band saw (small - $40 takes it)
  bench grinder with scotchbrite wheel - $25cdn
  bench belt sander - $25cdn

  Plus: I have absolutely everything else including torque wrench -
pneumatic squeezer, drill press, rivet gun, 37.5 deg. flare tool, compressor
etc. I have several bucking bars (all you need) and all rivet sets you need.

  All aircraft specific tools are mostly Avery but some from Cleaveland

  Everything must be sold and picked up by October 12 so it will no doubt be
a steal for whoever buys it.

  You can e-mail me at are_barstad at manulife.com or call me at 416-460-5141
(cell).

  I can sell parts (i.e. tools separately) but all aircraft parts must go as
one lot.

  Wings and empennage will go for US$2900 (~$3750 cdn)

  I do not have the ability or time to ship items unless it's a larger tool
collection.

  Are Barstad
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.754 / Virus Database: 504 - Release Date: 9/6/2004