[Wing] KMS Tools Tool Clearance

[Rob Prior]

For those of you in the Vancouver (BC) area, I came across some specials
at KMS Tools in Coquitlam (www.kmstools.com if you need the address)
that may interest some of you.  It appears someone's brought a large
load back from Boeing Surplus in the last couple of weeks, as they have
quite a large selection of these this weekend.  All of these are used.

$6.95 ea. Cleco pliers (30-40 pairs, most in good shape, a few in great
shape)

$4.70 ea. Side Grip Clecos 1/2" (40-50 didn't count accurately, almost
all in great shape)

$6.50 ea. 12" #30 and #40 drill bits, with Boeing speedchuck fitting on
the end (works great in a regular drill too)

Also, 6" #30 and #40 drill bits, with the speedchuck fitting, and jobber
length #30/40 bits (no fitting).  Didn't look at the prices.

They've got a large bin of each of the drills, and the #30/#40 bits are
separated out from the larger sizes... I guess someone told them that there 
were homebuilders in the area... Look carefully, some of the 12" bits have 
slight bends in them.  Most are fine, though.  Some may need sharpening.

$69.95 18ga. Air Nibblers.  That's 18ga *steel*, I bought one there a
while ago and it cuts through sheet aluminum like butter.  *Very* handy.

This public service announcement brought to you by:

-- 
---------
Rob Prior
rv7 "at" b4.ca
-----------------------------
Stop dreaming... Start flying
--------------------------------------------------------------------------
perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'