[Wing] Deburring Question

[Marc Degirolamo]

Hi Ted.......I used a .025 feeler guage to debur alot of holes when nothing
else would work......It is stiff enough and the edge is sharp enough to cut
the bur off the edge of the hole (which is all you really have to do
anyway). A piece of emery cloth or scotchbrite will finish the job....
Marc DeGirolamo
C-FRVE



----- Original Message -----
From: "Tedd McHenry" <tedd at vansairforce.org>
To: "Western Canada Wing List" <wing at vansairforce.org>
Sent: Wednesday, January 02, 2002 7:27 PM
Subject: [Wing] Deburring Question


> Does anybody have any good tips for deburring holes in tight places?  I'm
> thinking of locations such as the insides of control-surface ribs near the
tip,
> where there's no room to get a normal deburring tool in.
>
> ---
>
> Tedd McHenry
> Van's Air Force
> Western Canada Wing
> tedd at vansairforce.org
> www.vansairforce.org
>
> _______________________________________________
> Wing mailing list
> Wing at vansairforce.org
> http://vansairforce.org/mailman/listinfo/wing